Network Protocol and Standards Compatibility IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3x full-duplex flow control Interfaces GS724T-300: 24 RJ-45 connectors for 10BASE-T, 100BASE-TX, and 1000BASE-T (Auto Uplink on all ports) GS716T-200: 16 RJ-45 connectors for 10BASE-T, 100BASE-TX and 1000BASE-T (Auto Uplink on all ports) 2 Dual Personality SFP slots for fiber Gigabit Ethernet modules Administrative Switch Management IEEE 802.1D Spanning Tree Protocol IEEE 802.1W Rapid Spanning Tree Protocol IEEE 802.1S Multiple Spanning Tree Protocol Auto-voice VLAN* SNMPv1, v2c, v3 RFC 1213 MIB II RFC 1643 Ethernet Interface MIB RFC1493 Bridge MIB Jumbo Frame Support (up to 9KB) IEEE 802.1Q Tag VLAN GS716T-200: 128 Static VLANs GS724T-300: 128 Static VLANs IEEE 802.1p (Class of Service) DSCP - L3 QoS Port-based ingress/egress rate limiting IEEE 802.3ad static or dynamic link aggregration (LACP) DHCP client function Broadcast storm control Port mirroring (many-to-one) Port setting Green features: Power saving by cable length (<10m). Power saving by auto power when link down IGMP snooping v1/v2 IEEE 802.1x (RAIDUS) Access control list (ACL) - MAC, IP SNTP IEEE 802.1ab LLDp Protected ports** HTTP and HTTPS Auto denial-of-service (DoS) prevention Syslog Ping & traceroute Web-based configuration, anywhere on the network Smartwizard Discovery Utility program auto discovers devices (up to 254 agents/switches); set system configuration to each agent Configuration backup/restore (easy to configure more than one switch) Password access control Firmware upgradeable Support of Ehternet audio/video (EAV)* Active Flow Control Full-duplex IEEE 802.3x pause frame flow control Half-duplex back-pressure control Performance Specifications Forwarding modes: Store-and-forward Bandwidth: GS724T-300 = 48 Gbps, GS716T-200 = 32 Gbps Network latency: GS716T-200 average latency 4.5 us for 100 Mbps with 64 bytes GS724T-300 average latency 4.5 us for 100 Mbps with 64 bytes Buffer memory: 512 KB embedded memory per unit Priority queues: 4 Priority queuing: Weighted Round Robin (WRR) Address database size: 8,000 media access control (MAC) addresses per system Addressing: 48-bit MAC address Mean time between failures (MTBF): - Waiting for ODM to complete the MTBF reports Acoustic Noise: - GS724T-300 = 34.4 dBA - GS716T-200 = 33 dBA LEDs Unit: Power Per port: Link, activity, speed, duplex Power Supply Maximum Power Consumption: - GS716T-200 - 16.5W - GS724T-300- 21.5W 100-240V AC/50-60 Hz universal input Physical Specifications Dimensions (h x w x d): - GS716T-200: 43 x 440 x 205 mm (1.7 x 17.3 x 8 in) - GS724T-300: 43 x 440 x 205 mm (1.7 x 17.3 x 8 in) Weight: - GS716T-200: 2.56 kg (5.64 lb) - GS724T-300: 2.66 kg (5.86 lb) Environmental Specifications Operating temperature: 32° to 131°F (0° to 55° C) Storage temperature: -4° to 158°F (-20° to 70° C) Operating humidity: 90% maximum relative humidity, non-condensing Storage humidity: 95% maximum relative humidity, non-condensing Operating altitude: 10,000 ft (3,000 m) maximum Storage altitude: 10,000 ft (3,000 m) maximum Electromagnetic Compliance CE mark, commercial FCC Part 15 Class A VCCI Class A EN 55022 (CISPR 22) EN 55024 (CISPR 24) C-Tick Safety Agency Approvals UL listed (UL 1950)/cUL IEC 950/EN 60950 CE mark, commercial CUL 60950 (Listed)/EN 60950 (Low Voltage Directive) CB CCC Modules NETGEAR ProSafe AGM731F 1000BASE-SX SFP GBIC Module with LC connectors for 50um or 62.5um multi-mode fiber cable NETGEAR ProSafe AGM732F Fiber 1000BASE-LX SFP GBIC Module with LC connectors for 9um single-mode fiber cable NETGEAR ProSafe AGM733 Fiber 1000BASE-ZX SFP GBIC Module with LC connectors for 9um single-mode fiber cable Warranty NETGEAR Lifetime Warranty† ProSupport Service Packs Available OnCall 24x7, Category 1